ePOWER Battery Charger Manual

www.enerdrive.com.au Page 17
4. INSTALLING THE CHARGER
WARNING
Enerdrive recommends that all wiring be done by a skilled technician to ensure adherence to the best
practice standards for on-board DC electrical installations. Failure to follow these instructions can
damage the unit and could also result in personal injury or loss of life.
CAUTION
Before Beginning Your Unit Installation, Please Consider The Following:
The unit should be used or stored in an indoor area away from direct sunlight, heat, moisture or
conductive contaminants. This is an electronic device cooled by a fan and will prematurely fail if
installed in corrosive environments.
When placing the unit, allow a minimum of 75mm of space around the unit for optimal ventilation.
NOTE
The Enerdrive Battery Charger is designed to be permanently mounted.