Specifications

12
<AE MENU>
MODE
SHUTTER
GAIN
DSS
MAX DSS
FLICKERLESS
BRIGHTNESS
END
5.2.3 AE (Auto Exposure)
MODE Select Exposure mode. (INDOOR / OUTDOOR / SHUT PRI / MANUAL)
INDOOR Indoor white balance mode
OUTDOOR Outdoor white balance mode
SHUT PRI Shutter priority exposure mode
MANUAL Manual exposure mode
SHUTTER Select shutter speed. (1/60 (50)~1/100K)
Can be changed while in SHUT PRI and Manual mode.
GAIN Gain control (MIN, LOW, MID, HIGH)
DSS Digital slow shutter on/off
MAX DSS Select maximum slow shutter value. (x2~x128)
FLICKERLESS Flickerless on/off
BRIGHTNESS Adjust brightness level. (10~50)
5.2.4 BLC/WDR
BLC MODE Select backlight compensation mode. (OFF / AUTO / MANUAL)
AREA Select BLC area position. (1~9)
LEVEL Select BLC level.(HIGH / MID / LOW)
WDR MODE Wide dynamic range on/off
LEVEL Adjust WDR level. (10~50)
MODE Select alarm and MD/FD mode. (OFF / MD / EXT / FD / MD+EXT / FD+EXT)
AREA SEL Select MD area number. (1~4)
Select MD/FD enable/disable.
DEFAULT Set MD area as default.
ADJ TOP/LEFT Adjust the location of the MD area with boundary top and left.
ADJ BOT/RIGHT Adjust the location of the MD area with boundary bottom and right.
SENSITIVITY Adjust sensitivity of MD/FD area. (MD: 1~10 / FD: 1~64)
DWELL TIME Dwell time setup of zoom preset. (10, 20, ...,180sec)
PRESET SEL Select zoom preset number. (0FF, 1~10)
(When the MD/FD and/or Alarm is/are occurred.)
NOTE: The result of face detection can be inaccuracy.
5.2.5 ALARM/MD/FD
<ALARM/MD/FD MENU>
MODE
AREA SEL
---
DEFAULT
ADJ TOP/LEFT
ADJ BOT/RIGHT
SENSITIVITY
DWELL TIME
PRESET SEL
END
<BLC/WDR MENU>
BLC MODE
AREA
LEVEL
WDR MODE
LEVEL
END