Operating instructions

3.1 Sample connections for the use of multiple cameras

VIDEO OUT jack

Switch over unit

VIDEO IN jack

Monitor

VIDEO OUT jack

Power supply

VIDEO OUT jack

Power supply

Note Read the operation manual rst.

Power up unit and other components only after all connections are made.

PHASE adjustment Continuously turn potentiometer P of camera 1 until the picture off sampling pulse is

synchronous to that of camera 2. Should this be impossible, the same adjustment must

be made to camera 2, yet in the opposite direction to that of camera 1. Subsequently

align camera 3 with camera 2, camera 4 with camera 3 etc., in accordance with the

above-described method.

PHASE