Operating instructions

B PL LED-indicator B lights green when the camera is switched on.

C Power supply / 12VDC/24VAC power supply. Power supply unit see „Specications”.

power cord 230VAC power supply via power cord C. Make the connections rst, then switch

the unit on.

D LEVEL Output level adjustment with potentiometer D for DC controlled lenses.

P PHASE Potentiometer P for phase adjustment for mains sychronization.

E LENS Connection E for DC or AI controlled lenses. Connect the cable of lenses

with automatic iris control to the supplied 4 pin DIN plug. (Only for AI lenses

which are designed for operation with 9-12VDC and 50mA max.)

F 1 ... 8 DIP-Switch F to change the settings described under „DIP-Switch settings”.

G VIDEO OUT Video output G (BNC) for connection of external units (e.g. monitor, 75Ohm).

HO, Camera mount 1/4”-20UNC-thread HO/HU for camera mounting, for example on a tripod,

HU ceiling mount or P&T head.

N Dust cover To protect the CCD-sensors the camera module. Always attach dust cover N

when no lens is mounted.

K,L C/CS mount CS mount L for CS mount lenses. Insert the supplied C mount ring K

if C mount lenses are used.

M Locking screw To adjust the ange focus open screw M, turn the at CS mount ring L until the

focus maximum is achieved and fasten the screw again.

3. Connection and Operation

Rear view 12VDC/24VAC 230VAC Side view

D P B E

C F

N L

D B E

C F G