Specifications

5. Installation

5.1 Installation Instructions

• Make sure the power is removed before the installation.

• Follow the order for applying power.

First, connect the low voltage (AC24V or DC12V), then plug the AC adapter to AC outlets to avoid an

improper reset from power jitter and a damage from the surge voltage when no load.

Joy stick

VIDEO

SUB-OUT

connector

WARNING NEVER USE THIS CAMERA

1) in WATER.

2) in area where has SHOCK or VIBRATION which results in the problems for Auto Focus operation.

Zoom & Focus Adjustment

(Only works when OSD Menu is not operating)

▲ Zoom In

▼ Zoom Out

◀ Focus Near

▶ Focus Far

SYMBOL descriptions for joystick operation;

-▲,▼,◀,▶ denotes the directions of Joystick lever

operation.

☟

denotes the long press down straightly

for about 2 seconds.

IP Reset (Press over 10 sec by stick driver)