Specifications

SPECIAL Default Descriptions

PRIVACY -

10 Privacy zones which can be enabled individually by ZONE DISP are

available to mask the video.

ZONE NUMBER – Set a number to select a privacy zone from 1~10.

ZONE DISP – ON enables a relevant privacy zone.

H-POS, V-POS, H-SIZE and V-SIZE – Adjust the size and position of

zone.

COLOR – Select the color used for masking the zone form eight colors.

TRANSPARENCY – Defines the transparency for the mask zone.

MOTION OFF

MOTION can detect the changes in the motion window and displays the

results in blocks and/or a text message.

SENSITIVITY – Adjusts the detection sensitivity for motion.

High value increases the sensitivity to detect the small motion easily.

Too high sensitivity will cause the erratic detection by the tree leaves or

the light level changes and too low setting will fail in detecting the motion

H-POS,V-POS, H-SIZE and V-SIZE - Adjust the size and position of

the detection window.

BLOCK DISP – ON enables to display the blocks for the detected area.

MOTION OSD – ON enables to display a text message, MOVING !!!,

SMART MOTION ZOOM– ON enables to Automatic Zoom IN/OUT when

motion is detected and also enables MOTION OSD to ON.

Area to be zoomed in by SMART MOTION ZOOM can be set at

MOTION> SMART MOTION ZOOM>ZOOM TARGET. Clicking

“Up, Down, Left, Right and Enter bar” for ZOOM TARGET varies the

viewing angle to be zoomed when the motion occurs.

Set the video left and right and/or up and down by MIRROR/FLIP.

See ‘6.3.1 SMART MOTION ZOOM’ for detail.

STAY ZOOMING – Sets the duration time for zooming by Motion.

CAUTION I

Set the direction of video by MIRROR/FLIP before SMART MOTION

ZOOM setting. Otherwise ZOOM TARGET could be different from

your intention.

TITLE SET -

Camera title(name) can be set and edited up to 15 alpha numeric and

symbolic characters from ASCII codes(ENGLISH only).

Clicking the Up/ Down/ Left/ Right bars to move the cursor for choosing

characters and click the Enter bar to select them. The selected characters

are added and displayed on the top left corner and the cursor moves right

automatically for next input.

SP - Space is inserted when clicked.

BS – Cursor moves back when clicked.

CLR – Clears all the characters on input line when clicked.

POS – Sets the title position by using four direction bars and

clicked enter bar.