Specifications

Display Title OFF ON enables to display Camera Title on Monitor.
IR LED Mode OFF
IR LED Control(AUTO/OFF) is available with IR LED model only.
If IR LED is set to OFF, IR LED will be turned OFF but
DAY or NIGHT is still determined by the built-in light photo sensor.
IR LED Mode is workable with IR LED built-in model only.
Lens Initialize
Lens initialization is necessary during the installation or the regular
operation to align the position data with the mechanical positions whose
lens elements may move and deviate from its calibrated position by the
shock or vibration, for example, during the transportation.
LENS INIT checks the positions for zoom and focus at both of the end
positions and saves them for the references.
Lens initialization is automatically executed at power up.
CAUTION I
It is strongly necessary to execute LENS INIT in cases below;
1) At the final step for the installation.
2) When focus becomes out of control by the shock or
vibration.
6.3 ADVANCED CAMERA menu
Click ‘ADVANCED CAMERA MENU’ bar at CAMERA CONTROL menu to activate the
camera OSD menu.
Click Up/Down/Left/Right bars to navigate or change the parameters.
These options have been pre-configured at the factory for optimal performance.
MENU V3.07
1. PRIVACY
↵
2. MOTION OFF
↵
3. TITLE SET
↵
4. SMART IR |::::::::::::::| 0
5. MOTION DEBLUR ON
6. HLC LEVEL |:::::::|::::::| 10
7. BLC POSITION SET
8. POINTING ZOOM
↵
9. EXIT SAVE&EXIT
↵
22