Specifications

35
APPENDIX 2
Buttons
NOTE: In the operation explanation for each button, „ –> ” indicates that the buttons are pressed sequentially, and „&” indicates the buttons are
pressed together.
Operation Command
NOTE: Devices should be registered on the network keyboard and set up properly to perform the commands.
Button Designation Operation
Number (1 to 9)
• Device number or ID –>
, , , or : Selects a monitor, pane, device,
device or camera to control, or macro to perform.
Number (0)
•
–> –> : Starts panic recording of all camera channels of all devices registered on the network
keyboard.
•
–> –> & : Stops panic recording of all camera channels of all devices registered on
the network keyboard.
•
–> –> & : Deactivates alarm out of all alarm-out channels of all devices registered
on the network keyboard.
Shift
•
–> Button : Performs the secondary function of the button if the button supports two functions.
•
& : Locks buttons of the network keyboard.
•
& : Enters the LCD menu.
ESC
•
: Cancels the command during the command operation or returns to the previous menu during the menu
configuration.
Monitor
• Monitor ID –>
: Allows you to select the monitor.
Pane
• Pane No. or ID –>
: Allows you to select the selected pane.
Device
• Device No. or ID –>
: Allows you to control the selected device.
Camera
• Camera No. or ID –>
: Allows you to control the selected camera.
Macro
• Macro ID –>
: Performs the selected macro.
– / +
• Selects the previous or next monitor, pane, device or camera during the command operation.
• Navigates through setup menus or adjust number’s value during menu configuration.
Function (1 to 8) • Performs the preset function.