Specifications

46
RECORD SETUP
ALARM RECORDING
Click on the „ALARM RECORDING‟ submenu.
The layout of this menu is very similar to the
„CONTINUOUS / MOTION RECORDING‟ menu.
This menu screen allows the user to configure alarm-activated recording.
There are 2 sections to this menu:
SIZE / IPS / QUALITY:: Recording settings for each channel can be defined across a 24-hour period, in blocks
SCHEDULE: This section determines at what times the DVR will record and whether it is set to continuous or motion.
NOTE: Please refer to the instructions for the „CONTINUOUS / MOTION RECORDING‟ menu for details on setting
up the „SIZE / IPS / QUALITY‟ and „SCHEDULE‟ tabs within the „ALARM RECORDING‟ menu.
Alarm-activated recording can be used in conjunction with the „CONTINUOUS / MOTION RECORDING‟ menu.
The DVR can be configured to record continuously at a low image rate („CONTINUOUS / MOTION RECORDING‟ menu),
and then increase to a higher image rate during an alarm condition. („ALARM RECORDING‟ menu)
PANIC RECORDING
Click on the „PANIC SETUP‟ submenu.
Click on the SIZE, IPS, QUALITY.
During a Panic Recording condition, the DVR will override all other recording settings and record continuously on
all channels as per the settings configured here.