Specifications

45
RECORD SETUP
SCHEDULE
Click on the „SCHEDULE‟ menu.
To change „SCHEDULE‟ settings, highlight „CONTINUOUS / MOTION RECORDING‟ and press „ENTER‟.
Use the CURSOR KEYS to highlight „SCHEDULE‟ and press „ENTER‟.
The schedule box is highlighted in green.
Press „ENTER‟ to display the green cursor square.
Example: To set all channels to motion detection recording only between 18:00 and 00:00.
Use the CURSOR KEYS to move the green cursor to the 18:00 position and press „ENTER‟.
The cursor changes to orange to show the start position.
The schedule grid uses differently-colored blocks to denote the different recording modes:
- NO COLOR blocks: No recording.
- LIGHT BLUE blocks: The DVR will record continuously.
- DARK BLUE blocks: The DVR will only record while motion is detected.
- PINK blocks: The DVR will record continuously and with motion event.