Specifications

36
SYSTEM SETUP
EVENT / SENSOR
From the „System Setup‟ menu, click on the „EVENT / SENSOR‟ menu.
EVENT / SENSOR - HDD EVENT
Click on the „HDD EVENT‟ menu, and choose any field.
. Use the button to modify the value.
The DVR will continually monitor the health of the hard drives in the system and detect problems that may be developing.
SMART ALARM: Enables S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) hard disk monitoring.
CHECK INTERVAL: Frequency of testing.
DISK FULL EVENT: Determines whether a „Disk Full‟ condition would result in a HDD event.
EVENT / SENSOR - ALARM INPUT
Click on the „ALARM INPUT‟ menu, and choose any field.
Use the button to modify the value.
The menu will determine the behavior of each of the 16 alarm inputs.
OPERATION: Alarm inputs can be enabled or disabled.
TYPE: Alarm inputs can be set as normally open (N/O) or normally closed (N/C).