Operating instructions

3. Description of the Front/Rear View

3.1 Front Panel

3.2 Rear Panel

1. Plug Inlet: A DC 12V inlet that connects to an external power supply.

2. ETHERNET 10/100 connector:

This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. PoE (Power over Ethernet) function:

Provides power to the device via the same cable as used for the network connection.

3. SD indicator:

The green light indicates the SD card cannot be removed.

4. SD/SDHC CARD slot:

This is used for updating system software and archiving / accessing critical images.

5. USB port:

The user can use a USB device cable to connect the Video Server to the USB port on the PC.

1. AUDIO IN: The connector is used to connect the audio output from other devices to the Video Server.

2. AUDIO OUT:

Provides the Video Server’s audio signal to a speaker or stereo

3. Video in connectors:

The BNC connector is used to connect to the video output from the camera.

4. ALARM I/O:

This is an 8-PIN connector including the DIGITAL IN/OUT and RS-485 items for connecting with

external devices.

RESET: Returns to factory default

6. POWER indicator:

Indicates the power status of the unit