Operating instructions

9
3.5 PoE (Power over Ethernet)
These technologies will enable the development of new networked appliances, by providing power as well as data
over existing Ethernet cables.
The Summary Comparison of PoE Standards (Table 1) is listed as follows.
Connect to a PoE Switch
The Standard RJ-45 PIN configuration for connecting with a PoE Switch is shown below.
Table 1. Summary Comparison of PoE Standards
STANDARD
SOURCE
LOAD
REMARKS
Source
Voltage
Ethernet RJ-45 connector pin number *
1 2 3 4 5 6 7 8
Load
Voltage
DC Load
Connec-
tor
IEEE
802.3af
using data
pairs
48VDC,
protected
RX,
DC+
RX,
DC+
TX,
DC-
spare spare
TX,
DC-
spare spare (embedded)
Industry Standard
for embedded PoE
IEEE
802.3af
using spare
pairs
48VDC,
protected
RX RX TX DC+ DC+ TX DC- DC- (embedded)
Industry Standard
for embedded PoE
The compatible PoE Hubs (Table 2), which can be used with the unit, are shown in the tables below.
Table 2. Compatible PoE Switch
Manufacturer Model Port Note
PLANET
FSP-804P 4 Port PoE Switch
POE-151 1 Port PoE Switch
D-Link DWL-P200 1 Port PoE Switch
Video Server
PoE Switch
RJ-45
RJ-45
RJ-45
to Network
to PC
PoE
Power Inlet (Using the supplied
48V power supply,connect to a
wall power outlet.)