Operating instructions

3.2 Rear Panel

1. DC jack

The inlet connects to an external power supply. Connect with the 12 VDC/24VAC TUV-approved Power Supply;

or connect with the UL Listed Class 2 Power Supply or ITE power supply marked ’LPS’ or its equivalent.

2. Video in connector

The BNC connector is used to connect to the video output from the camera. 1 camera can be connected to the

connector.

Video out connector

This BNC connector provides a video signal to the main monitor.

3. ETHERNET (PoE) Connector

This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. PoE (Power over Ethernet) function:

Provides power to the device via the same cable as used for the network connection.

NOTE: Please refer to the APPENDIX – PoE Installation Method for more details.

4. ALARM I/O

This is an 24-PIN connector including the alarm input x 6, alarm-out x6, GND x 6, RS-485+-(2 pins), audio input

and audio output items for connecting with external devices.