Operating instructions

29
Change the Network Setting - DDNS
The „Network” page has, on its upper left, the „DDNS” icon. Please follow the steps below to change the DDNS
setting through the network if necessary.
1. Click the
DDNS button at upper left above to enter the „DDNS SETTING” page.
2. Click the „Enable DDNS Function” to checkmark the attached box and activate the function.
3. Click „DDNS Type” to open the list of DDNS modes to choose from: „DynDNS” and „hn”. Click the „Apply button
and connect their website automatically and visit it. Type in your dynamic IP Address and Email Address. If they
are accepted by the website, you will get an Email containing your DDNS Account and DDNS Password in your
Email box.
4. Type in the „DDNS Host Name”, the „DDNS Account” and the „DDNS Password”.
5. Click the
Submit button to submit the new setting.
6. Click the
Home button to return to the home page.
NOTE: Please refer to 6.1.8 PPPoE & DDNS section for more details.
Description of function keys
Enable DDNS Function: Checkmark to activate the function
DDSN Type: Click to open the list of two DDNS modes to choose from: „DynDNS” and „hn”.
Click the „Apply button and connect this website automatically and enter it. Type in your dynamic IP Address and
Email Address. If they are accepted by the Website, you will get an Email containing your DDNS Account and DDNS
Password in your Email box.
DDNS Host Name: Type in your host name in the attached space.
DDNS Account: Enter it in the given space.
DDNS Password: Enter it in the required space).
Submit: Click to set.