System information

16
Refer to the AE SETUP in the camera setup.
9. Repeat steps 2 through 8 for each additional preset position.
10. Select SAVE by pushing the
Joystick to the right. Press Cancel to exit the Preset menu without saving.
6. After aiming the camera (view direction and lens control), release
CTRL.
7. Select „Event Function” and pushing the
Joystick left or right. Then the event function setup displays.
5. After selecting a preset position, press and hold CTRL. Use the Joystick to control the direction of the camera and lens.
• Please refer to the below (4.5.1 Event Function) for more details.
NOTE: The features will vary depending on the camera module installed in your dome camera.
8. Set the „Auto Exposure”