System information

10
3.6 Setting Dome Camera Protocol
If a dome camera is to be installed with a Fastrax keyboard controller, select the default protocol.
Consult service personnel if a dome camera is installed with device other than a keyboard controller.
Figure 10 - Protocol Selection Switches
D11
Parity Bit
S6-3
Off None
On Even
S/W
On Off Function
D1 S4-1
Enable Disable Alarm
D2 S4-2
PAL NTSC NTSC/PAL
D3 S4-3 (Reserved)
D4 S4-4 RS-422 RS-485 RS-422/RS-485
D5 D6 D7 D12
Protocol
S5-1 S5-2 S5-3 S6-4
Off Off Off Off F2, F2E, Pelco-D, Pelco-P: (Default)
Off Off On Off F2, F2E
Off On Off Off Sensormatic RS-422
Off On On Off Pelco-D, Pelco-P
On Off Off Off Vicon
On Off On Off Ernitec
On On Off Off (Reserved)
On On On Off F2
Off Off Off On
Philips (Bosch)
Off Off On On (Reserved)
Off On Off On
Dynacolor
Off On On On (Reserved)
D8 D9 D10
Baud Rate
S5-4 S6-1 S6-2
Off Off Off 2400 bps
Off Off On 4800 bps
Off On Off 9600 bps (Default)
Off On On 19200 bps
On Off Off 38400 bps