Installation guide

12
4. Program and Operation
4.1 Dome Camera Selection
Before you program or operate a dome camera, you must select the dome camera by pressing the dome camera No. + CAM.
Example: Pressing 1, 0 and CAM key sequentially will select dome camera 10. The selected dome camera ID will be displayed on the LCD monitor of the
keyboard controller.
4.2 Accessing On-Screen Menu Utility
You can call up the On-screen menu utility on your monitor by pressing MENU key on the keyboard controller, the following On-screen menu utility will appear:
4.3 How to control On-Screen Menu Utility
Button Function
MENU
Call on On-screen menu utility
Joystick up or down
Navigate through the menu items.
Joystick left or right or IRIS OPEN
Go into the sub-menu items.
Joystick left or right or Zoom handle twist or
Tele, Wide
Change value.
Enter the editing title mode.
CTRL + Joystick
Change value of angle.
IRIS OPEN
Enter the changing angle mode.
IRIS CLOSE
Exit the changing angle mode.
ESC
Escape (EXIT)
DOME MENU
AUTO SCAN
PRESET
TOUR
PATTERN
ALARM
AREA TITLE
PRIVACY ZONE
CAMERA
DOME SETUP
FUNCTION RUN
EXIT (ESC TO EXIT)
4.4 More Information
For more information, please see the Full Installation and Operating Manual.