Operating instructions

Digital Video Recorder
67
Troubleshooting
Problem Possible Solution
No Power
y Check power cord connections.
y Confirm that there is power at the outlet.
No Live Video
y Check camera video cable and connections.
y Check monitor video cable and connections.
y Confirm that the camera has power.
y Check camera lens settings.
Live Video Very Bright
If a cable is attached to the “Loop” connector, make certain it is connected to a
properly terminated device.
DVR has stopped recording
If hard disk drive is full, you will either need to delete video or set the DVR to the
Overwrite Mode.
The icon displays,
however, the DVR is not
recording.
When the DVR is in the Pre-Event recording mode, the yellow
and display
when there is no event, and the DVR is not recording. The red
and display
when any event occurs and the DVR starts recording.
System Log Notices
Boot Up Panic On
Shutdown Panic Off
Restart Clear All Data
Upgrade Clear Disk
Upgrade Fail Format Disk
Power Failure Disk Full
Time Change Auto Deletion
Time Zone Change Search Begin
Time Sync Search End
Time Sync Fail Clip-Copy Begin
Disk Bad Clip-Copy End
Login Clip-Copy Cancel
Logout Clip-Copy Fail
Setup Begin Clip-Copy User:
Setup End Clip-Copy From:
Remote Setup Change Clip-Copy To:
Remote Setup Fail Clip-Copy Duration of Video:
Setup Imported Clip-Copy Camera:
Setup Import Failure Callback Fail
Setup Exported Print Begin
Setup Export Failure Print End
Setup Export Cancel Print Cancel
Schedule On
Schedule Off