Operating instructions

Operating Instructions

Highlighting Position and pressing the

button allows you to adjust the screen position on the VGA monitor.

Use the arrow buttons on the setup screen to move the VGA screen

position in the direction you want. Selecting the default button at the

center cancels the screen positioning operation and reloads the default

position.

Remote Control

Highlight Remote Control in the Devices menu and press the

button. The Remote Control setup screen allows

you to select a port and make correct settings for a remote keyboard.

Highlight the box beside Port and select from None, RS232

and RS485. If the RS232 port and RS485 port are in use for

PTZ control, networking or text input, the remote keyboard

cannot be configured.

Highlight Setup… and select the correct Baud Rate, Parity,

Data Bits and Stop Bits for the device you are connecting to

the DVR.

Highlight the box beside Remote Control Product and

select the device from the list.

Figure 33 — Remote Control setup screen.