Operating instructions

Digital Video Recorder
9
In the playback mode, pressing the
button plays video backward at high speed. Pressing the button again toggles
the playback speed from
, and . The screen displays , and respectively. Pressing the
button plays video forward at high speed. Pressing the button again toggles the playback speed from ,
and
. The screen displays , and
respectively. When in the pause mode, pressing the
button
moves to the next image and pressing the
button moves to the previous image.
PLAY/PAUSE Button
In the live monitoring mode, pressing the
button freezes the current screen and the screen displays
icon. When
in the playback mode, pressing the
button plays back images at regular speed or pauses playing video.
Pressing the button selects a highlighted item or completes an entry that you have made during system setup.
PANIC Button
Pressing the
PANIC button starts panic recoding of all camera channels, and displays on the screen. Pressing the
button again will stop panic recording.
PLAYBACK Button
Pressing the
PLAYBACK button enters the playback mode, and pressing the button again exits the playback mode.
When entering the playback mode, video is paused. Pressing the (Play/Pause) button plays back video at regular
speed. The screen displays
when the DVR is in the Pause mode and the screen displays when the DVR is playing
back video.
When in one of the multi-view formats, pressing this button enters the Triplex mode. The DVR supports the Triplex
function: monitoring, recording and playing back at the same time.
ALARM Button
The
ALARM button has two functions. First, it will reset the DVR’s outputs including the internal buzzer during an
alarm. Second, it will display the event log when you are in the live monitoring mode unless there is an active alarm.
This operation can be user password protected.
CLIP COPY Button
Pressing the
CLIP COPY button allows you to copy video clips.
PTZ/Zoom Button
Pressing and holding the
PTZ/ZOOM button for three seconds or longer enters the PTZ (Pan/Tilt/Zoom) mode and the
PTZ icon flickers. Pressing the button again exits the PTZ mode. Pressing the arrow buttons or CAMEO/MENU button
allows you to control properly configured cameras.
Pressing the button zooms in the current image in double on the screen. You can use the arrow buttons to move the
rectangle to another area. Pressing the
(Play/Pause) button zooms in the image in rectangle.
ID Button on Remote Control
If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.
(Refer to the System Information setup screen in this chapter for further information on setting the System ID.) If the
system ID is 1 to 16, you must to press the
ID button on the remote control and then press the number button (1 to 16)
in order to control that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared
remote control at the same time.