Operating instructions

Operating Instructions
6
Chapter 3 — Configuration
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 — Installation.
Front Panel Controls
Figure 3 — 16-Channel DVR front panel.
Camera Buttons SPOT/Display Button Sequence/Group Button
Cameo/Menu Button Power LED HDD LED
Alarm Out LED Network LED Clip Copy LED
USB Connector Arrow Buttons Play/Pause Button
Panic Button Playback Mode Button Alarm Button
Clip Copy Button PTZ/Zoom Button
The front panel looks and operates much like a VCR combined with a multiplexer. Many of the buttons have multiple
functions. The buttons on the infrared remote control, while laid out differently, perform the same functions as those
on the front panel. The following describes each button and control. Take a few minutes to review the descriptions.
You will use these to initially set up your DVR and for daily operations.
NOTE: The infrared sensor on the DVR is just to the right of the camera buttons. Make certain that nothing
blocks the sensor, or the remote control will not function properly.
You can also use a USB mouse (not supplied) to navigate through the screens and menus much like
you would on a computer.