Operating instructions

Operating Instructions
30
OSD Settings (DISPLAY ¼ OSD Tab)
y Status/Camera: Check each OSD item box to turn it On or Off.
Remote Control – The
icon displays when the DVR can be controlled using the infrared remote control.
Zoom – The
icon displays on the enlarged video.
Network – The
icon displays when the unit is connected to a network via Ethernet.
Freeze & Sequence – The
icon displays while in the Freeze mode, and the icon displays while in the Sequence mode.
Screen Group – The screen group number displays when the DVR is in other than the 4x4 display mode for the 16-channel
DVR and 3x3 mode for the 8-channel DVR.
Free Space – The
icon displays when the DVR is in the Recycle mode. The percentage of available storage space displays
when the DVR is not in the Recycle mode.
Date/Time – The current date and time information displays.
User Name – The name of the current user logged in displays.
Camera No. – The camera number displays in the top-left corner of each camera screen.
Camera Title – The camera title displays in the top-left corner of each camera screen.
Record – The record related icons display on each camera screen.
PTZ – The
icon displays on each PTZ camera screen with PTZ capabilities.
Text-In – The text input strings display on the screen. You can adjust the Display Dwell time (sec.) for the text input strings
displayed on the screen.
y Transparency: Adjust the transparency of the setup screens by using the slide bar.
y OSD Margin…: Set the Horizontal and Vertical margins so that text and icons will display within the edges of the
monitor.
Main Monitor Settings (DISPLAY ¼ Main Monitor Tab)