Operating instructions

98
MENU SUBMENU MENU TITLE FACTORY DEFAULT VALUE
Camera Camera Copy Settings CH1: Checked, CH2~CH16: Not checked
Title CAM01 ~ CAM16
Covert Off
Adjustment Brightness –> -10
Contrast –> -5
Saturation –> +16
Hue –> +16
Position -> +7
PTZ Copy Settings CH1: Checked, CH2~CH16: Not checked
Protocol PELCO-D
PTZ ID 1 ~ 16
Speed 7
Baud rate
9600
Display
OSD Date/Time Checked
Percent Bar
Checked
Camera Title
Checked
Resolution/Quality Checked
Alarm/Motion Event
Checked
Boot Logo Not checked
Transparency -12
OSD Margin Left –> +15
Right –> + 15
Top –> +4
Bottom –> +10
Main Sequence Mode Full 1 Ch
Sequence Interval
2
Event Popup
Off
Popup Event Type
Alarm
Popup Dwell
2
Spot Spot Monitor On
Spot Event Type
All
Spot Dwell
2
Spot Channel CH1 ~ CH16 All Checked
VGA VGA Resolution 800 x 600 / 75 Hz
Device Menu