Operating instructions

93
9. Frequently Asked Questions (FAQ)
Q. DVR will not turn on even if the power switch is „ON” position.
A. Make sure the DVR is connected to the DC 12V power jack.
Q. After turning on the DVR, Power LED on front panel lights, but no video output on monitor.
A. Make sure the monitor is turned on and connected to DVR.
Check monitor’s brightness control.
Check if the video output cable on the DVR is well connected to the video input cable on the monitor.
Q. Remote controller doesn’t work.
A. Check if remote control type is „Universal”. If remote control is universal, access
MENU - Display - Remote
Control - REMOTE CONTROL and check remote control type: U Type1 ~ U Type6. Press associated number
button on upper part of remote control.
Check batteries in remote control.
Q. It doesn’t record video on to the Hard Disk Drive.
A. Check if overwrite is enabled from
MENU - Record - Setup - Channel.
Q. It doesn’t record on date set on holiday record setting.
A. Check if current time is set correctly from
MENU - System - Data/Time -Data/Time, and also check if holiday
parameters are set correctly from [MENU]-[Record]-[Schedule].