Operating instructions

84
8.2.3 Remote Setup
REMOTE SETUP: Change DVR setup remotely over network.
• MANUAL: Select to input IP address and Port number manually.
• ADDRESS: Locate DVR’s IP address then enter it in this field box.
• PORT NUMBER: Locate DVR’s TCP port setting then enter it in this field box.
• ID: Locate ID assigned to the DVR then enter it in this field box.
• PASSWORD: Locate password assigned to the DVR then enter it in this field box.
• CONNECT: Connect to access DVR’s SETUP MENU.
• CLOSE: Exit DVR Setup and return to main page.
Each menu is identical to the setup menus of the DVR. Refer to Chapter 6. DVR Setup for more details.