Operating instructions

65
7.4 Record
Record Setup
(refer to Chapter 6.3 for record setup details)
(1) For Record, user must have authority for Record.
(Access
Menu - System - User - Authority and check Record, (illustrated on page 58)
(2) For Continuous record: Access
Menu - Record - Setup - Channel - Resolution and set record quality settings.
For event record: Access
Menu - Record - Setup - Event - Resolution and set record quality settings.
For panic record: Access
Menu - Record - Setup - Panic - Resolution and set record quality settings.
If you choose ‘No Record’, there will be no recorded data.
When event occurs, event profile will be activated in channel which has event. (illustrated on page 40)
Overwrite on: When HDD becomes full, it starts recording images over the oldest images.
Overwrite off: When HDD becomes full, it stops recording.
Factory default setting for Overwrite is OFF.
In order to enable overwriting function, access
Menu - Setup - Channel and check checkbox for Overwrite.
Record Resolution: No Record, D1, 2CIF, CIF
Record quality: User can set quality among 4 steps for each camera channel. Default setting for quality is „High”.
When cameras are not connected in Live mode, blue screen will display.
When cameras are not connected in Playback mode, black screen will display.
Press
PANIC button to start recording all channels as set for Panic recording. Press the button again to return to
schedule recording mode.
NOTE: Panic recording does not function if HDD is full when overwrite function is not enabled.
7.5 Search
It is to search recorded data in various modes (Schedule, Event, Continuous) easily and to playback.
Search by Calendar, Event list and Bookmark is available.
Pressing right button of mouse will popup MONITORING popup window, and click Search.
Or press
SEARCH button to enter into Search menu.