Operating instructions

63
7.2 Event Monitoring
Event Monitoring Setup
(1) For event monitoring, user must have authority for Schedule and Event.
(Access
Menu - System - User - Authority and check Schedule and Event. Illustrated on page 58)
(2) Access
Menu - Record - Schedule to set Recording type for Alarm-In or Motion.
(illustrated on page 41)
(3 To see event you must configure items below:
• Alarm:
Menu - Event - Alarm-Out (illustrated on page 47)
• Motion:
Menu - Event - Motion - Action (illustrated on page 46)
• Video Loss:
Menu - Event - Video Loss (illustrated on page 46)
(4) You may control what is being seen on the OSD by selecting checkbox of Alarm/Motion Event from
MENU – Display – Display – OSD:
Event monitoring continues for the set dwell time for event recording and when dwell time expires, it returns to
previous screen.
Set Event Refresh Time for output duration. During this duration, other events will not show.
Menu - Event - Alarm - Alarm-In - Duration/Event Refresh Time (illustrated on page 44)
Menu - Event - Motion - Action - Duration/Event Refresh Time (illustrated on page 46)
Menu - Event - Video Loss - Video Loss - Duration/Event Refresh Time (illustrated on page 46)
Alarm
Motion
Duration:
Recording time
Event Refresh Time:
Event output duration