Operating instructions

60
7.1.4 SEQ
While in full screen mode, press SEQ button on frontal key pad or the remote controller to cause channel of connected
cameras to display sequentially according to the preset dwell time.
Access
MENU - Display - Display - Main - Sequence Interval Popup for dwell time setup. (illustration available in
page 33)
Access
MENU - Display - Display - Main - Sequence Mode Popup for channel display mode. (illustration available in
page 33)
Press the button again or switch to other display format to exit sequence mode.
While in sequence mode, PTZ Control, Freeze, Zoom, PIP will not function.
Freeze Zoom Sequence PIP
1 full screen mode
O O O O
4 split ~ 13 split
display mode
O X O X
16 split display mode
O X X X
In playback mode
X X X X
Setup root
X X Menu –> Display –> Display
–> Main –> Sequence Mode
/ Sequence Interval
Setup Menu –> Display –>
Display –> Main –>
Sequence Interval
7.1.5 PTZ
User with PTZ Control Authority can control PTZ cameras.
(Access
Menu - System - User - Authority and check checkbox for user authority for PTZ control. Illustrated on
page 58)
Access
Menu - Display - Camera - PTZ to setup PTZ model, PTZ ID, and Baud rate. (illustrated on page 36)
As seen on the illustration, only on the single channel view will
the PTZ related commands will be available. (PTZ configuration
must be made before operating PTZ commands.
See page 36 for PTZ setup details)
In split screen mode In full screen mode