Operating instructions

46
NOTE: Default Setting of DVR is ‘CLEAR ALL’ which means deactivate all.
User must select mask zone firstly, before set ‘Motion’ scheduled Recording.
2) ACTION Tab Window
Set Alarm-Out On / Off for each channel in case motion is detected.
NO.: Click the „NO. (Number)” button to show the
„COPY SETTINGS” popup menu.
• ALARM-OUT: Set „ON” or „OFF” for sending alarm
signal to relay output terminal
16 channel DVR has 1 and 2 out ports
• DURATION: Set alarm dwell time from 1 to
99 seconds
• EVENT REFRESH TIME: Set interval from 1 to 99
6.4.3 VIDEO LOSS List Option Item
The „VIDEO LOSS” list option item is selectable from „EVENT” group icon. By selecting „VIDEO LOSS” list option item,
„VIDEO LOSS” tab window appears.
Setup configuration for video loss by each camera
NO.: Click the „NO. (Number)” button to show the
„COPY SETTINGS” popup
• BEEP: Beep „ON” or „OFF” for audible Video loss
indication
• ALARM-OUT: Set „ON” or „OFF” for sending alarm
signal to relay output terminal
16 channel DVR has 1 and 2 out ports
• DURATION: Dwell time configurable between 1 to
99 seconds
• EVENT REFRESH TIME: Set interval configurable
between 1 to 99 seconds