Operating instructions

38
6.3 Record
6.3.1 Setup
These are three profiles that BCR series support:
Channel: Set recording for Continuous recording
Event: Set recording for Alarm and Motion detection.
Panic: Set recording for panic recording
The record will perform on a profile basis
Recording Priority (PANIC > EVENT > CHANNEL)
1) Channel
Set recording quality of each channel in continuous mode only
Applicable schedule: Time, Time+Motion, and Time+Alarm
• No.: Click to popup Copy Setting box.
• Resolution: Set resolution among CIF, H-D1 & D1.
• Quality: Set recording quality among Low, Normal,
High and Very High.
• FPS: Set frames per second among 1, 2, 3, 4, 5, 6,
7(8), 10(12), 15(25) & 30.
• Overwrite: Check checkbox to enable recording
over the oldest data once all available storage
space has been used.
• Remain FPS: Remaining Frames per Second.
• Estimated Day/HDD: Estimated remaining
available time for HDD with no recorded data
based on quality related settings.
• Estimated Size/Day: Estimated required size of
HDD for 24 hour recording based on above settings.
NOTE: Estimated Day/HDD may vary as field environment.
The given figure (day) is not a guaranteed number.