Operating instructions

Connect cameras to the camera input on rear panel of DVR marked CAMERA IN.

4.2.3 Camera

4.2.4 Monitor

Connect the video output marked MONITOR to VIDEO-IN of Main Monitor.

Before turning on, be sure all necessary devices such as Power

adaptor, cameras and Monitor are connected properly to DVR!

NOTE: This unit is for 12VDC. Inadequate supply of power may cause breakdown.

Must use UL approved surge protector and highly recommend UL approved UPS power strip for

unwanted shutdown of the DVR unit.

Improper shutdown and power surge will damage the DVR unit.

Be sure to power off DVR when connecting external devices.

4.2.5 Power Cable

Connect DC 12V, 6.67A Adaptor to the back side of Power Jack for proper operation

of 2HDDs and optical drive.

Rear view of camera