User manual

Single Repeater Installation Manual Intelligent Reliable Power
13
© ENECSYS 2010. All rights reserved.
2.6 Turning the Enecsys Repeater on
The Enecsys Repeater comes supplied with an external 5V DC power supply. The power adaptor
serves as the disconnect device - a socket outlet in accordance to the national wiring codes for
the country shall be installed near the equipment and shall be easily accessible.
To turn the Enecsys Repeater on feed the power cable through the power cable conduit, attach
the 5V DC power supply jack-plug from the power port on the reverse of the Enecsys Repeater.
FIGURE 7. Connecting the Enecsys Repeater’s power supply.
5V DC IN