User manual

Single Repeater Installation Manual Intelligent Reliable Power

If, after having installed a Repeater in the attic/roof space an ‘x’ indicating that an insufficient

communication link between the Repeater and the Gateway is still displayed a secondary

Repeater can be added (R2).

If the building has a metallic roof as found in an industrial/commercial building then it may be

necessary to use a Double Repeater.

When installing a repeater the Gateway should be placed into installer mode.

FIGURE 2.

Internal Gateway and Repeater placement.

INITIAL REPEATER LOCATION

SECOND REPEATER LOCATION

PV MODULE

GATEWAY

ATTIC

1st FLOOR

GROUND FLOOR