System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012

1.3 Conventions used in this manual

The following conventions are used throughout this manual. These conventions should be

noted and followed at all times.

WARNING

Warning statements must be heeded at all times. A warning symbol indicates that a

process or instrument has the potential to harm or cause lethal injury if the correct

method of handling is not employed.

CAUTION

Caution statements are used to indicate where a part of the installation process may

have the potential to damage equipment. Caution statements should be followed at all

times.

ATTENTION

Attention statements are used to indicate where a part of the process or instrument

has a special requirement. Attention statements should be followed at all times.

1.4 Safety

Before installing and using any Enecsys micro inverter please ensure that you have fully read

and understand all of the installation instructions and heed all warnings and cautions given.

WARNING

The installation and/or replacement of Enecsys micro inverters must only be

carried out by qualified professionals.

WARNING

All electrical installations should be performed in accordance with all local

and national electrical installation codes and practice.

WARNING

All electrical connectors must be dry before making any connections and

must be kept dry during the installation process.

WARNING

Lightning protection

To avoid voltages being induced by lightning, the roof-mounted

wiring must be arranged as radial branches, or as a single branch.

Wiring loops or rings must not be used. Further independent active

protection against lightning strike may be required, to local and

national standards.