System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012
45
numbers will automatically be reporting on the list of available serial numbers.
• The installer will need to drag each inverter serial number to the appropriate
module. Refer to the “PV module / micro inverter serial number form” that was filled
with stickers during the installation for their positions in the array design.
Step 3: Check work and launch installation
• When you are finished with dragging the available serials to the modules, save and
finish. You will arrive on the PENDING INSTALLATIONS Screen.
• Inspect the information categories for green check marks. If there is an “x” in a
column, it means that the information is not complete. Click on the button to add
the required information.
• If all the information is complete and correct, select the red GO LIVE button on
the right.
• After you have set the installation live, click CONFIRM.
• As soon as the physical installation is completed, the inverters start sending
messages to the gateway and the new system can be seen on the monitoring
website.