System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012

• The SERIALS tab allows the user to manually load the inverter serial numbers, or to edit

numbers that are already there.

• Type the inverter serial in the Search box. Click the ADD TO LIST button to add it to the

Available Serials column. Drag the added number from the column onto the module.

Saving#the#Pending#Installation#

• After the layout is done, click the SAVE button. This will allow you to pause and

return to finalize the installation later, if necessary.

7.2 Installation finalization and launch

If you have saved an installation layout previously, you can resume the installation and

finalize it.

Step 1: Find the pending installation

• Log on to the Enecsys monitoring site with your Installer information. You will be

able to return to your saved installation from the previous steps by going to

“Pending Installations” tab and selecting it.

Step 2: Drag-and-drop inverter serial numbers

• If the gateway serial number has been entered, the array design was set-up

previously, and the gateway is communicating correctly, the inverter serial