System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012
41
Step 5: Begin layout by adding a section.
• Before any sections are created, the screen will appear as below.
• Select the ADD A NEW SECTION button to create a new PV system layout.
Step 6: Enter section details.
Q:#Why#would#an#installation#consist#of#“sections”?#
A: Smaller installations are not as likely to need to be defined in sections. Larger installations may
have areas of different energy production characteristics: different module types, different
predicted Annual Energy Production, layout characteristics such as orientation to the sun, or other
factors that are recommended to be defined separately to refine data collection.
Section#Details#
• Define section parameters, predicted energy yield, and type of modules.
• Define inverter configuration: choose the appropriate icon and inverter model. Note
that there are different icons for side-by-side panels sharing a Duo inverter and for
panels end-to-end that share a Duo. This is for the layout to fill properly.
• Define the default layout grid. The grid can be moved and changed later.
• The system-generated inverter ID field will look up entries to prevent errors.