System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012
27
Single micro inverters are available in the following models with various power capacities and
DC input MPPT voltage ranges:
Model
Power*
MPPT Range (DC volts)*
SMI-S217W-60
217W
23 – 35
SMI-S240W-60
240W
23 – 35
SMI-S200W-72
200W
30 – 42
SMI-S240W-72
240W
30 – 42
SMI-S263W-72
263W
30 – 42
*Consult the datasheets on Enecsys’s website for most current information. All technical specification
information is subject to change without prior notice.
Figure 1 Single Micro inverter
Single micro inverter scope of delivery:
• 1 Enecsys micro inverter unit.
• Inverter serial number sticker (on the outside of the inverter packaging)
ATTENTION: Retain the Serial Number Stickers
The serial number stickers are used to correlate the position of the inverter
and its module to its location in the installation. Without installation location
information, you will not know where each of the inverters and modules are
physically located in the array, which you will need to know for the
installation setup. A sheet for the stickers is provided: see “10 PV
module/micro inverter serial number form”.
Install with antenna cover facing down