System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012
21
5.4 Installing one or more single repeaters
The single repeater should ideally be installed in the roof space, directly below the micro
inverters. It must be installed near a mains power socket for the plug-top mains adapter. If you
need to install a second single repeater, this should be located on one of the intermediate
floors between the repeater in the roof space and the Enecsys gateway on the ground floor,
as shown in the diagram in section 5.2 “Using Single Repeaters”.
Single repeater scope of delivery:
• 1 Single repeater unit.
• 1 Plug-top mains adapter – 5V DC 1A.