Manualshelf

System information

ManualsBrandsEnecsys ManualsComputer equipmentSingle Repeater
11121314151617181920
Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012
18
4.1.5 Installer Mode screen symbols
Screen Symbol
Description
“ENECSYS” is always displayed.
Enecsys gateway IP address.
Gateway server IP address.
Number must be equal to the total number of inverters and repeaters
installed. If 0 displays, there is no communication link. If the number
is low, test connections.
Communication link quality: a reliable communication link has been
established. This symbol must be displayed.
Communication link quality: the communication link is not good
enough for reliable operation. Try moving the gateway nearer to the
inverters, or install a repeater.
Communication link quality: Weak communication link. Install one or
more repeaters.
The gateway is connected to the internet.
The gateway is not connected to the internet and must be checked
for malfunction.
The power source is connected.
Communication link status: flashing when trying to establish a link,
steady when a link has been established.
Connection to server: the gateway is connected to the server.
Connection to server: the gateway is not connected to the server.