System information

Enecsys Installation and Operation Manual – Version 1.6 –June 6 2012
14
CAUTION: the gateway must only be used with the antenna that is already fitted to it. It
must NEVER be connected directly to an external antenna mounted on the roof of the
building or anywhere else, as it has no surge protection from lightning. If you need to
use an external antenna then you must install a double repeater. See section 5, “Using
Enecsys Repeaters”.
Gateway scope of delivery:
• 1 Enecsys gateway.
• 1 Plug-top mains adapter – 5V DC 1A.
• 1 Ethernet cable – length 2m.
3.1 Mounting the gateway
• The gateway must be installed indoors near a mains power socket.
• It can be freestanding, either upright as shown in the illustration, or laid flat on its
plastic feet.
• It can be wall mounted using two screws in the position shown in the diagram.
• It can be mounted using sticky pads in the position shown in the diagram below.
Ethernet Cable
Plug-top adapter