Specifications

Installation 11 of 20
Installation
Wall mounting the double repeater(screw fixed method)
1. Attach the antenna to the lower SMA connector on the right hand
side of the double-repeater, simply screw the antenna into place in a
clockwise direction.
2. Connect the 5V supplied PSU to an AC power source wall socket.
3. Connect the DC power jack to the DC power port on the reverse of
the double repeater thread the cable through the semi-circular
channel on the back-plate of the double-repeater, this will help to keep
the cable in place and prevent it from becoming detached.
4. Select the appropriate location for mounting the double-repeater.
5. Using the wall mount template locate the desired position of the
double-repeater; ensure that there is adequate free-space around the
double-repeater to allow for any future movement or maintenance of
the device.
6. Mark two horizontal spots on the wall 50 millimetres or 2 inches
apart, install the screws into the wall.
7. Line up the back plate holes of the double-repeater with the screws
on the wall and then slide the repeater down to fix the unit in
position.