Installation guide

Installation manual Intelligent Reliable Power
29
© ENECSYS 2010. All rights reserved.
7.4 Antenna
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 2dB.
Antennas not included in this list or having gain greater than 2dB are strictly prohibited for use
with this device.
The required antenna impedance is 50 ohms.
EAD BKR2400 2.4GHz RP-SMA antenna (Part No FBKR35068-RS-KR).
This device complies with Industry Canada RF Radiation exposure limits for general population.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
7.5 Micro-inverter
Enecsys Micro-inverters conform to NEMA6/IP66 enclosure standards.