Installation guide

Installation manual Intelligent Reliable Power

5.3 Connecting the Gateway to the home network

1. Connect the supplied Ethernet/LAN cable to a spare Ethernet/LAN port on the rear of the

home router.

2. Connect the remaining end of the supplied Ethernet cable to the Ethernet port on the left

hand side of the Enecsys Gateway as shown in Figure 6.

By default the first screen presented is the ‘home user screen’.

For full instructions on connecting the Gateway to the home network please refer to the Gateway

Installation Manual.

FIGURE 6. Connect the Gateway to the home network.

GATEWAY

ETHERNET

CABLE

ROUTER