Installation guide

Installation manual Intelligent Reliable Power
15
© ENECSYS 2010. All rights reserved.
5.2 Connecting the DC cable link harnesses
Warning: The AC bus cable must be isolated from the mains utility before attempting any
repairs or maintenance.
Warning: Never disconnect the DC cabling whilst under load.
Attention: Once the Photovoltaic modules are exposed to daylight they will start to produce a
DC current.
FIGURE 5. Connecting the DC link cables from the Micro-inverter to the junction box of the PV module.
MICRO-INVERTER
AC CONNECTOR
DC LINK CABLES
PV MODULE
JUNCTION BOX