System information

36 Installation and Operation Guide Enecsys LLC • 275 Redwood Shores Drive • Redwood Shores, CA 94065 • www.enecsys.com
• The installer will need to drag each inverter serial number to the appropriate module. Refer
to the “PV module / micro inverter serial number form” that was
with stickers during the
installation for their positions in the array design.
Step 3: Check work and launch installation
• When you are with dragging the available serials to the modules, save and
You will arrive on the PENDING INSTALLATIONS Screen.
• Inspect the information categories for green check marks. If there is an “x” in a column, it
means that the information is not complete. Click on the button to add the required infor-
mation.
• If all the information is complete and correct, select the red GO LIVE button on the right.
• After you have set the installation live, click CONFIRM.
• As soon as the physical installation is completed, the inverters start sending messages to
the gateway and the new system can be seen on the monitoring website.