System information

32 Installation and Operation Guide Enecsys LLC • 275 Redwood Shores Drive • Redwood Shores, CA 94065 • www.enecsys.com
Step 5: Begin layout by adding a section.
• Before any sections are created, the screen will appear as below.
• Select the ADD A NEW SECTION button to create a new PV System layout.
Section Details
Q: Why would an installation consist of “sections”?
A: Smaller installations are not as likely to need to be
in sections. Larger installations
may have areas of different energy production characteristics: different module types, differ-
ent predicted Annual Energy Production, layout characteristics such as orientation to the sun,
or other factors that are recommended to be
separately to data collection.
Step 6: Enter section details.
• section parameters, predicted energy yield, and type of modules.
•
inverter on: choose the appropriate icon and inverter model. Note that
there are different icons for side-by-side panels sharing a Duo inverter and for panels end-
to-end that share a Duo. This is for the layout to
properly.
•
the default layout grid. The grid can be moved and changed later.
• The system-generated inverter ID
will look up entries to prevent errors.