System information

NNN-NNN r001 Enecsys Installation and Operation Guide 31
Setup 2: Enter installation site details.
• The Installation Name is used to identify the installation site: this name will also be displayed
on the installation owner’s monitoring dashboard, so use something customer-viewable.
• Reference Numbers are optional: for example, they can help the installer to cross-reference
the installation site to an account number.
Step 3: Input the system information.
• System information describes the PV system: Type, Number of Modules, number of invert-
ers, Mounting system, and Roof Type are entered here.
• “Total cost of system” and “Feed in Tariff” are used to calculate report values.
Step 4: Add gateway serial number(s).
• At this point, you will be entering a serial number for each gateway used. Note that the in-
verter serial numbers will auto-populate as the installation is
• Note that the user interface says “You will need one gateway for every inverters”: larger
installations may use multiple gateways.