System information

NNN-NNN r001 Enecsys Installation and Operation Guide 21

5.3. Installing one or more single repeaters

GATEWAY

5V DC

Figure 16. Enecsys Repeater

• Install the single repeater in the roof space, directly below the micro inverters. See “Figure

15. Repeaters, Gateway, and Router” on page 20.

• It must be installed near an outlet/mains power socket for the plug-top power adapter.

• If the installation requires a second single repeater, this should be located on one of the

intermediate

between the repeater in the roof space and the Enecsys gateway on the

ground

as shown in the diagram in section “5.2. Using Repeaters” on page 20.

Figure 17. Repeater scope of delivery

• 1 Single repeater unit.

• 1 Plug-top power adapter -- 5V DC 1A

• Assorted attachment hardware